Breaking News: Grepper is joining You.com. Read the official announcement!

lcd arduino

Zouari Mehdi answered on April 15, 2022 Popularity 10/10 Helpfulness 4/10

answer lcd arduino

lcd arduino

Comment

// Created BY ZOUARI mehdi 
// LCD ARDUINO 

/*
  LiquidCrystal Library - Hello World

 Demonstrates the use a 16x2 LCD display.  The LiquidCrystal
 library works with all LCD displays that are compatible with the
 Hitachi HD44780 driver. There are many of them out there, and you
 can usually tell them by the 16-pin interface.

 This sketch prints "Hello World!" to the LCD
 and shows the time.

  The circuit:
 * LCD RS pin to digital pin 12
 * LCD Enable pin to digital pin 11
 * LCD D4 pin to digital pin 5
 * LCD D5 pin to digital pin 4
 * LCD D6 pin to digital pin 3
 * LCD D7 pin to digital pin 2
 * LCD R/W pin to ground
 * LCD VSS pin to ground
 * LCD VCC pin to 5V
 * 10K resistor:
 * ends to +5V and ground
 * wiper to LCD VO pin (pin 3)

 Library originally added 18 Apr 2008
 by David A. Mellis
 library modified 16 April  2022
 by Zouari Mehdi


*/

// include the library code:
#include <LiquidCrystal.h>

// initialize the library by associating any needed LCD interface pin
// with the arduino pin number it is connected to
const int rs = 12, en = 11, d4 = 5, d5 = 4, d6 = 3, d7 = 2;
LiquidCrystal lcd(rs, en, d4, d5, d6, d7);

void setup()
{
  // set up the LCD's number of columns and rows:
  lcd.begin(16, 2);
  // Print a message to the LCD.
  lcd.print("hello, world!");
}

void loop()
{
  // set the cursor to column 0, line 1
  // (note: line 1 is the second row, since counting begins with 0):
  lcd.setCursor(0, 1);
  // print the number of seconds since reset:
  lcd.print(millis() / 1000);
}

Popularity 10/10 Helpfulness 4/10 Language whatever

Source: Grepper

Tags: arduino lcd whatever

Link to this answer
Share Copy Link

Contributed on Apr 15 2022

Zouari Mehdi

0 Answers Avg Quality 2/10

lcd arduino

Contents

More Related Answers

lcd arduino

Grepper

Documentation

Social

Legal

Contact

Oops, You will need to install Grepper and log-in to perform this action.